Categoria: Offer machines

N. 02 Vigoureux Dyeing / Printing tops sliver machine , brand Sant’Andrea , with comb head ,

16 coupling , n. 04 different printing drums included .

N. 02 fancy yarn twisting machine PA-FA mod.  NTF 2 , with n. 30 heads each /1 machine ,
hollow spindle , double independent drafting lines , feeding from tapers  by cans , or slivers by Finisher / Flyer bobbins  , delivery on tubes H. 450 mm. , ring diameter 140 mm. , Electronic panel to set fancy effects, , Y.O.C. : 1 x 2005 , 1 x 2006 .

N. 01 Bale Opener TECNOMECCANICA BIELLESE ,

model ABL 1600 , Year 2001 ,W.W. 1.600 MM. , tape length 4.500 mm. 

Nº 01 Opener Carding Willow machine , brand ROLANDO , w.w.  1.600 ;

Machine refurbished , equipped with New Electric Switchboard , 380V. 50 Hz ;

N. 01 Automatic winder for continuous shrinkage and high bulking yarns ,

SAVIO ESPERO VOLUFIL , year 2010 , with n.  45 heads 

Nr. 01 Double twisting (2×1) frame SAVIO GEMINIS mod. 242 C ,
with Nº 220 spindles , double drive , two independent frames ,
package lifting to yarn breaks ,
feeding hight 8 “ inch , basket for bobbin diam. 185 mm. ,
delivery 6’’ ( 152 mm. ) x 4º20′ ,
pneumatic yarn thread in ,
blower Electrojet ,
inverter to speed set ,
V 380/50-60 hz ,
Year 1996.
Excellent condition of maintenance

N. 01 Hank to Cone Winder FADIS , Mod. MATRIX D,
n. 30 independent spindles, pitch 6 / 8″ (152 / 200 mm),
hank-holding for hanks weighing up to 2 Kg., waxing device,
electronic positive yarn over-feeder, electronic yarn guided winding system controlled by a step motor piloted and controlled by one inverter for each single spindle, year 2016

N. 01 Cabinet Hanks dyeing  LORIS BELLINI , model APPC 125 , Year 2017 , capacity 160/190 Kg.

( depending on the fibers and count yarns ) , low liquor ratio control system , under static pressure up to 110º , bar 0,4 ,dyeing kitchen with double tanks , expansion and colour introduction vessels .Machine complete with : N. 02 extractable hanks holder basket with proper trolley ,n. 02 sets of hanks sticks holder , electric panel with PLC control panel to set dyeing parameters  , valves , main pump , etc 

n.1 LAFER fringing ( flecadora para frazadas )
type FRV 3000
working width 3.300 mm.
year 1999

N.01  Gill Box Cognetex , mod. SC 400 11 VA with autoleveller , 
feeding creel 10 positions by cans ,delivery  1 sliver in 1 can  700 x 1000 with automatic doffing ;
N.01  Gill Box Cognetex , mod. SC 400 22 V  ,  
feeding creel 10 positions by cans ,
delivery  2 slivers in 2 cans  700 x 1000 with automatic doffing ;
N.01  Gill Box Cognetex , mod. SC 400 22 V  ,  
feeding creel 10 positions by cans ,
delivery  2 slivers in 2 cans  700 x 1000 with automatic doffing ;

N. 01 Rebreaker Blender drawing frame COGNETEX  mod. SMC 400 , 11V ,
comb head with rotary flanges , N. 104 pinned faller bars with 4 pins/CM ,
n. 04 defelting zones ( with nº 5 draft rubber cylinders )  , 
delivery 1 sliver in 1 can 700 x 1000 with automatic doffing ;
feeding creel :
Option 1 ) = 16 coupling by cans
Option 2 ) = 24 coupling by bobbins  

N. 01 Spinning frame Cognetex FTC 9 L ,
504 spindles , gauge 90 mm. ,
ring diam. 70 mm. , tube H. 300 mm. ,  draft SKF PK  1601 ,
double frame , single drive , tangencial spindles drive belt ,
manual  spools doffing ,  Magitex blower ,
Inverter to speed set ,
yoc 1989 ;

N. 1 Ring Spinning and Fancy frame , PA-FA ,  mod. EXPO 80  ,  
with nr.  48 spindles  , suitable to produce effect yarns in medium / coarse counts , in new combinations of colors in a wide range , for both regular and or fancy yarns , double independent draft to permit the entrance of separate roving ( machine can be feeding by one or two slivers )  , computer to set machine data and adjustment processing parameters , feeding by external feeding creel  ( by slivers from Flyer or Finisher bobbins or  by tapers from cans )   ,ring diameter 140 mm. ( like new ) ,delivery on tubes h. 600 mm. ,year o.c. 2005 ,

Nº 05 SAVIO HANK-TO-CONE WINDER,
mod. DPS , with 24 heads / 1
take up package traverse 6” (152 mm), conicity 4°20’,
waxing device , yarn tensioner , yarn over-feeder ,
swift circumference from 1100 to 1800 mm. ,

N. 01 SEYDEL 870  stretch breaker tow to tops ,
year manufacture 1992 , 
heater plates, csr steamer,  
delivery 700 x 1000 mm.  Can coiler ,  

N. 1 Rebreaker Blender drawing frame N.S.C. Schlumberger , GC12 RL5,  year 1988 ,comb head with chain drive , with n. 144 combs , n. 04 defelting zones – nº 5 draft rubber cylinders , feeding creel  32 coupling by cans ;

Linked with : N. 01 ST. Eloi bumps press 400 mm. , year 1988 , with automatic knotting .

Nº 01 Cone to cone winder SAVIO ORION ” RL ” , with Nº 60 heads ,
– feeding by cone with automatic cone change ( 240 mm. diameter max ) ,
– pitch 6″ (152 mm) , conicity 4º 20′ , drum diam 94 mm. 2 turns asymmetric step ,
– 2 section yarn stretcher + waxing device ,
– four pneumatic control panel ( to split yarn tension 24/16/8/8/ position ) ,
– automatic joint yarn Splicer Mesdan mod. 690 L or Fisherman 410 B ,
– Nº 2 trolley automatic bobbins doffing ,
– Nº 2 automatic magazine cone reserve ,
– Computer to set speed , yarn length on package and to control/monitor all the winding process ,
– electronic yarn clearers Loepfe Zenit YM F ,
– Magitex Blower ,
– Lightening along the machine ,
– Year 2005 .

N. 04 Autoconer SCHLAFHORST , 338 Typ D , n. 30 Heads ,
year : 1 x 2004 , 2 x 2005 , 1 x 2006 ;
delivery on 6″ ( 152 mm. ) taper 5°57′, drums 2 assymetrical turns ,
automatic package doffing by 1 trolley ,
cones reserve with individual cradles each head ,
automatic spools feeding ( spools up to H 350 mm. ), ring diam. up to 75 mm.,
3 preparation cops station ,
electronic clearers Loepfe Zenit ( foreign fiber control ) ,
Thermo Splicer ,
waxing device ,
Yarn tension sensor (autotense) ,
Informator to set data ,
travelling blower ;

Nonwoven needle punching small plant , composed by :

N. 02 Cutting machines Gamba , ww. 1000 mm. ,

N. 01 Tearing grinding machine Becherini , ww. 1500 mm. ,

N. 01 Carding machine Bonino , ww. 2800 mm. , twin doffer , linked with needle punching machine ;

N 02 N.S.C. ERA Combers , year 2012 , exit 700 x 1000 mm. ,

feeding 24 coupling by cans , machines in good condition of maintenance ;

Nr. 1 rag-grinding tearing machine ,  Brand  : GAMBA  ( Biella Italy )  , 

w.w. 2.000 mm. , nr. 5 tearing cylinders and nr. 5 condensers  , 

with  automatic feeding Silo  , fibers discharging by cyclone  , 

complete with suction dust device , year of. C. 1992 .

N. 01 Integrated Drawing frame N.S.C. GC 15 , year 2002 ,

with defelting zone , feeding creel 24 coupling ,

delivery  2 slivers / 2  bobbins , autodoffing .

N. 02 Karl Mayer winder , Model . RC10NG ,
with 20 heads each / 1 machine ,
manual spools feeding , Ypsilon type round magazine with 05 position ,
spools from H 450 to H 600 mm. ,
delivery cones on 10″ ( 270 mm. ) ,
drums 2 symmetrical turns ,
automatic package doffing ,
cones reserve with individual cradles each head ,
electronic clearers Uster MK46 count range NM 0,5 to NM 13 ,
Splicer ,
travelling blower ,
year 1993 ,
machines fully refurbished

with Nº 24 heads ,  feeding by cone with automatic cone change ( 240 mm. diameter max ) , pitch 6″ (152 mm) , conicity 4°20′ , drum diam 94 mm. 2 turns asymmetric step , 2 section yarn stretcher + waxing device , automatic joint yarn Splicer Mesdan mod. 490 L , Nº 1 trolley automatic bobbins doffing , Nº 1 automatic magazine cone reserve , Computer Alfa-Panel to set speed , yarn length on package and to control/monitor all the winding process , electronic yarn clearers Uster UPC mkc20 ,  Magitex Blower , – Lightening along the machine , Year 1998 .

year 1999 , combs head with rotary flange drive , feeding creel  08 positions by cans , delivery 2 slivers in 2 cans 600 x  900 with automatic doffing ,

year 2000 , n. 18 positions , delivery 6 “ x 4º20′ , drum diameter 86 mm. 2 turn symmetric , automatic doffing , waxing device , steam by electric resistance , blower device .

Steel inox , under vacuum and under pressure  , 138 º max temperature working programmer , Internal capacity n. 3 trolley  , internal dimensions : diam. 1300 x 3185 mm. , 4975 liters , steam feeder by electric boiler year 2011 ( very less used ) 60 kw equipped with 4 resistors ( 15 kw each/1 ) , water filter ;

n.42 spindles , single frame , hollow spindle , double independent drafting line ,  feeding from sliver by cans or bobbins , or by cones yarn , two delivery options : on spools h. 450 mm. ring diameter 120 mm. – or on cones  pitch 8’’ ( travel 200 mm. – cones of 225 mm. )  x conicity 3°30’,  Electronic panel to set fancy effects,  year of construction 2015 ,

–

with 160 spindles ( single frame ) , ring diam. 100 mm. , tube H. 450 mm. , Hight draft pendulum arms ( composed by 1 feeder top cots roller , 2 elastic cots rollers besh , 1 release top cots roller ) , feeding by cans , yoc 1980

N. 03 Combing machine Sant’Andrea , type P 90 ,
year 1993 / 94 ,
crimping device , feeding creel 24 positions by cans ,
delivery 1 sliver in 1 can 800 x 1000 mm.

Nº 01 Bale Openers , brand BONINO , w.w. 2.000 mm. ;

Nº 01 Bale Cutting Breaker , brand ROLANDO , w.w. 1.000 mm. ;

Nº 01 Rotary Cutting machine , brand ROLANDO  , w.w. 600 mm. ;

Nº 01 Rotary Cutting machine , brand ROLANDO , w.w. 400 mm. ,

Nº 01 Opener Carding Willow machine , brand ROLANDO , w.w.  1.500 , with Condenser Feeding ;

Nº 01 Carding Machine , brand F.O.R. Biella , w.w. 2.500 mm. ;

N º 01 Carding Machine , brand OCTIR ,w.w. 2.500 mm. ;

Nº  02 Automatic Vertical Baling Press Fibers  , brand Gualchierani ;

nº 08 Needle Head machines , brand Officina DLF ( Prato Italy ) , with nº 10 position each/ 1 mc. , suitable to produce tape ribbon yarns , fringed chains and cut yarns ( tagliatino – catenella – fettuccia ) , delivery on cones 6″ x 5º57′ , inverter to speed set , year 2000/2001 , good condition of maintenance .

n. 04 Ring spinning frame ZINSER 421, with 580 spindles e/1 , year 1992 nicely maintained , ring diam. 51 mm. J11.1 , h. tube 260 mm. , gauge 82,5 mm. , automatic spools doffing , draft SKF PK 1601  , blower Electrojet ;

N. 01 Bale press ” CODORO ” machine brand , year 2012 , very less used like new , dimension box 80 x 80 x 80 CM. ; approximate bales weight 100 kg. 

Nº 01 Gill Box Drawing Frame , brand MACKIE , mod. Speedmack , with autoleveller , combs head with chain drive, feeding creel  10  positions by cans , delivery  1 sliver in 1 can  1000 x 1200 mm. . with auto doffing can ,  inverter to speed set , Year 1992 .

Nº 01 Gill Box Drawing Frame , brand MACKIE ,  mod. Speedmack combs head with chain drive, feeding creel  10  positions by cans , delivery  2 slivers in 2 cans 700 x 1200 mm. . with auto doffing can , inverter to speed set , Year 1992 .

Nº 01 Gill Box Drawing Frame , brand MACKIE ,  mod. Speedmack , combs head with chain drive, feeding creel  10  positions by cans , delivery  4 slivers in 4 cans 450 x 1000 mm. , Year 1989 .

Nº 01 Gill Box Drawing Frame , brand MACKIE ,  mod. Speedmack ,combs head with chain drive, feeding creel  10  positions by cans , delivery  4 slivers in 4 cans 450 x 1000 mm. , Year 1989 .

N.01 Steamer Machine , brand OBEM Biella , 

steam by electric resistance ( boiler fully overhauled on 2018 )  , electrical panel with work cycle time temperature , capacity 1 trolley ;

Nr. 02 Chenille yarn machine , brand : GIGLIOTTI & GUALCHIERI  mod. ACTA , n.01 mc x 64 spindles , n. 01 mc. x 32 spindles , ring diam. 127 mm.  tube height 450 mm. external feeding creel, rotary  blade, Electrojet blower, Y.O.C. 1997 , nicely maintained ;

N º 01 Carding machine F.O.R. Biella ,  w. width 2500 mm. , silo feeder , fibers weight device , pre-avantrén , roll conveyor , 1º drum with 4 workers and strippers , 2º drum with 4 workers and strippers , volante , doffer , delivery  two tapers in two cans 1000 x 1200 mm. ;

Nr. 02 cone winder ATTUCCI , with nº 9 heads each /1  , pitch 10” (250 mm), cylindrical or conical tubes , speed control by means of display , yarn over feeder device , electronic yarn meter counter , stop head to diameter required , feeding by internal creel , suitable for spools or bobbins , YOC  1 x 1999 , 1 x 1998 . Fully refurbished 

N. 01 High Shrinking Bulking machine Motocono , Mod. H.B.I. ,
Year 2001, 52 independent heads , stainless steel steam chambers and belts ,
external feeding creel (top/tail ) ,
Electronic speed control , electronic steam regulation control ,
yarn detector reserve by photocell outout ;
Link with :
N. 01 Cone winder Motocono , year 2001 ,
n. 52 heads , delivery pith 6” (152 mm.) , conicity 5º57’ ,
2 section yarn stretcher , waxing device , yarn overfeeder device ;

we can sell smaller modules ( depending on your need ) , starting from a minimum of n. 08 positions ;

Intersecting Drawing Frame Sant’Andrea mod. SHS 24
– feeding creel 12 x 2 doubling by cans
– elastic ballon rollers + herisson head ,
– automatic delivery 4 slivers into 2 cans diam. 700 x 1000
– year of construction 1992

Ball Winder CAMPANINI Model SCT240.12C
Year 2004 , with 12 Spindles with N.3 Sets of spindles , programmable and adjustable speed from 50 to 1200 rpm by inverter , device to change automatically the winding cycle period to make the balls more or less fluffy, machine suitable to produce balls of wool, acrylic, blended, fancy yarns and similar fibers , balls weight from 20 to 250 gr. ; 

n. 01 Air Compressor CompAir Hydrovane , mod. 258 , direct drive rotary vane , year 2002 ( excellent condition very little used ) , KW 45, Perkinson  powered 1450 rpm , auto unloaded valve , integral aftercooler , press bar 12 , M3/min 7,33 ; 

combs head with chain drive  , feeding creel  12  positions by cans , delivery  2 slivers in 1 can 700 x 1200 mm. with auto doffing ,  Year 1984

Nº 01 Automatic Winder MURATA Mach Mini , single head , delivery pitch 6” (152 mm.) taper 5º57′ , electronic clearers Peyer PI 121 ,waxing device , round magazine from 12 residual cones / warping cones (max diam. 120 mm.), fisher man knotter , stop head to diameter required ;

Automatic Winder Murata , Mach Mini , single head , delivery pitch 6” (152 mm.) taper 4º20′ , electronic clearers Peyer PI 121 , waxing device , round magazine from 24 spools feeding ( max diam. 58 mm. , Splicer  , electronic yarn meter counter

N.01 Blending drawing frame Sant’ Andrea , 2M , year 1998 , 2 defelting combs head VSN with screw drive , 1 reducing intersecting head DSN with pinned rollers , feeding creel 24 positions by bobbins and cans , ensimage device , delivery 1 sliver in 1 can 800 x 1000 mm. with automatic doffin

N. 02 woollen spinning frame GAUDINO F2K ,
140 spindles each /1 , single drive , single frame face ,
false-twist device with spiral needles ,
ring diam. 160 mm. tube H. 600 mm. , year 1987 ;

N.01 Gill Box Cognetex , mod. SC 420 11 VA, year 1995, autoleveller ,
combs head with rotary flange drive , feeding creel 6 positions by bobbins or cans , delivery 1 sliver in 1 can 800 x 1000 with automatic doffing .

N.01 Gill Box Cognetex , mod. SC 420 22 V ,year 1995 ,
combs head with rotary flange drive , feeding creel 10 positions by cans ,
delivery 2 slivers in 2 cans 800 x 1000 with automatic doffing ,

N.01 Shrinking bulking SUPERBA mod. Univap,
with n.10 individual belts ,
external feeding creel top/tail ,
stainless steel steam chamber ,
electronic speed control ,
electronic steam set-up ,
yarn detector reserve by photocell output ,
year 2001

Complete line textile waste opening raw material , composed by :
Nº 02 Garnett , brand : F.O.R. ( Biella )
feeder, entry cylinders,breast, 3 carding drums , doffer, working width 1500 mm.
Note: metallic card clothing on good condition , n. 2 drums e n. 10 workers as spare parts ;
Nº 01 Thread stretchers / pickers machine , w.w. 600 mm. , brand F.O.R ( Biella )
Nº 01 Cuttering guillotine machine , w.w. 400 mm. , brand Gamba ( Biella )

Nº 01 CORGHI HANK-TO-CONE WINDER,
WITH 04 HEADS ,
TAKE UP PACKAGE ON TRAVERSE 6” (152mm),
CONICITY 5°57’,
MECHANICAL SLUB CATCHER WITH MICROMETRIC CHECK SYSTEM ,
WAXING DEVICE ,DOUBLE YARN TENSIONER ,
OVER-FEEDER,SWIFT WIDTH 240 mm (1 KILO HANK WT),
SWIFT CIRCUMFERENCE FROM 1100 TO 1800 mm. ,

N. 01 Cone Winder Corghi,mod. RE ,
with n. 04 independent heads , one motor each head ,
yarn thread-guide, pitch 6” inch, conicity 5º57′, expansion mandrel ,
waxing device , stop cone to diameter required by microswich .

N. 01 Autoconer SCHLAFHORST 238 Typ 146 ,
year 1992 , n. 30 Heads ,
delivery on 6″ ( 152 mm. ) taper 4°20′,
automatic package doffing by 1 trolley ,
cones reserve with individual cradles each head ,
feeding from big spools till 600 mm. high ,
electronic clearers Loepfe YM TK 750 ,
waxing device , THERMO Splicer ,
Conometer , Informator to set data , travelling blower .
Fully overhauled

N. 01 Double twisting SAVIO mod. TDS 15 NR ,
year 1992 , with n. 240 spindles ,
gauge 212 mm. ,double drive , two independent frames ,
package lifting to yarn breaks,
feeding package 2 x 6″ soleil or by assemly winder ​bobbin 8″/10 inch ,
diam. 165 mm. from assembly winder, ​
delivery 6’’ ( 152 mm. ) conicity Biko / 5º57′ ,
pneumatic yarn thread in,
blower Magitex .
Nicely maintained

N. 01 Assembly winder O.M.P. Bodega , Y.o.c. 1990 ,
With nº 12 single head ,
travel 8″ inch , tube diam. 43 mm.,
2 ply feeding by internal creel with BTSR electronic yarn detectors ,
electronic yarn meter counter head x head ;

Nr. 01 Automatic winder Savio Espero M , n. 28 heads , take-up package on traverse 6” (152 mm.), conicity 4°20’, grooved drums diam. 94 mm. , knotter air Splicer Mesdan 490L, double pneumatic yarn tensioner, waxing device, clearers Peyer 531 , feeding by external creel suitable for big spools or cones , automatic doffing, inspector control, illumination along the machine, travelling blower Magitex, Y.O.C. 1994.

Nr. 01 Automatic winder Savio Espero mod. E, n. 28 heads , take-up package on traverse 6” (152 mm.), conicity 4°20’, grooved drums diam. 94 mm. , knotter air Splicer Mesdan 490L, double pneumatic yarn tensioner, waxing device, clearers Peyer 531 , automatic spools feeding (smart-feeder type) automatic doffing, inspector control, illumination along the machine, travelling blower Magitex, Y.O.C. 1994.

N. 01 Double twisting SAVIO mod. TDS 15 N ,
year 1987 , with n. 170 spindles ,
gauge 212 mm. ,double drive , two independent frames ,
package lifting to yarn breaks,
feeding package 8″ ​, ​bobbin diam. 160 mm. from assembly winder, ​
delivery 6’’ ( 152 mm. ) conicity 4º20′ ,
pneumatic yarn thread in,
blower Magitex .
Excellent condition of maintenance , still running .

N.02 STRAYFIELD radio frequency dryer ,
suitable for cones or hanks , mod.SS040TB ,
40 KW , year of construction 1990 ,
Excellent condition , little used machines ;

Nº 02 Woollen Spinning Frame Gaudino FST 350 ,
252 spindles each /1 , single drive , single face , selfstiro ,
false-twist device with spiral needles ,
ring diam. 75 mm. tube H. 350 mm. ,
year 1992

N. 01 Assembly – Twisting machine GALAN
with n. 160 Spindles ( 80 x 2 ) , double independent side ,
ring diam. 150 mm. , H. Tube 600 mm. , external feeding creel ,
4 ply , stop spindle feeding to break or lack yarn ,
year 1990 ;
Spindles tube included.

Nº 0​1 Reeling machine Tintori , mod. Vanguard 50 MX ,
single side , swift lenght 5 meters​ ​, external feeding creel ,
stop side to break yarn by casse fils,
currently being prepared per 50 hanks , Y.O.C. 19​87

N. 02 Shrinking and high bulking winder Savio RRS Volufil ,
delivery 6 “ x 4º20′ , automatic doffing , waxing device ,
steam by electric resistance , blower device ,
1 x 24 position and 1 x 18 posiyion , year 1992 ;

N. 01 Semi worsted ring spinning frame Gaudino FPK 8 C ,
Year 1992 , with ​ 180 Spindles ,
ring diam. 75 mm. , tube H. 350 mm. ,
single drive , single frame ,
High draft pendulum arm with 8 cylinders ,
feeding by slivers on cans .

Nº 01 Cuttering machines , brand : GAMBA – Biella ,
w. width 1500 mm. , year 1990

Nr. 01 Fancy yarn twisting Saurer-Allma mod. FM-F ,
with nr. 80 spindles ( 40 x 2 sides ) ,
hollow spindle , SKF draft ,
electronic programmer PC to set fancy effects and video data processing
feeding by slivers or bobbins yarn with external feeding creel
ring diameter 110 mm.
delivery on tubes h. 450 mm.
year o.c. 1993
Supply included : Nº 01 Cops winder x flanged hollow spindles bobbins Delta Rof with 12 position ;
n. 300 tubes for spindle h 450 mm – n.120 Flanged tubes for hollow spindle

Nº 01 Cone to cone winder ​SAVIO ESPERO RL ,​
with Nº 32 heads ,
​feeding by cone with automatic cone change​​,
pitch 6″ (152 mm) , ​ ​conicity 5°57′ , ​ ​
drum diam 94 mm. 2 turns asymmetric step ,
​2 section yarn stretcher + waxing device ,
automatic joint yarn ​Splicer Mesdan mod.​ ​492 Aquasplicer or 490 L ,
N​º 1 ​trolley​ ​ automatic ​bobbins ​doffing ,
Nº 2 automatic magazine cone reserve ,
Computer ​Alfa-Panel ​ to set speed , yarn length on package and to control/monitor all the winding process ,
electronic ​ ​yarn c​learers Loepfe YM 840​ ,
Magitex​ ​ Blower ​,​
​lightening​ ​ along the machine ,
Year 1997 .

Intersecting Drawing Frame Sant’Andrea mod.SHS 24
– feeding creel 16 doubling by cans
– herisson head ,
– automatic delivery 4 slivers into 2 cans diam. 700 x 1000
– year of construction 1990

N. 01 Assembly winder FADIS mod. TUAN BE , Y.o.c. 1990 ,
With nº 12 single head ,
adjustable travel 6″ / 7″ / 8″ inch ,
tube diam. 43 mm.,
2 ply feeding by internal creel ,
electronic yarn meter head x head ;

N. 01 Autoconer SCHLAFHORST , 338 Typ D ,
year 1998 , n. 30 Heads ,
delivery on 6″ ( 152 mm. ) taper 4°20′,
drums 2 assymetrical turns , automatic package doffing by 1 trolley ,
cones reserve with individual cradles each head ,
automatic spools feeding with 1 preparation station ,
electronic clearers Loepfe YM TK 930 F ( foreign fiber control ) ,
waxing device , THERMO Splicer , Yarn tension sensor (autotense) ,
Informator to set data , travelling blower Jacobi .

N. 01 Automatic Woollen Set Carding machine brand : F​.​O​.​R​.​ ( Biella ) ,
working width 2500 mm .
Feeder , Weight device ,
Rouletabosse , Avant-Train + 3 Carding Group ,
Peralta , Over-ground conveyor ,inlet unit ,
Double frottage tape condenser with single string ,
19​2 good ends, Divisor 11,8 mm.,
​Powered by CA motor , Upgrade with Inverter to speed Set .

N. 01 double twisting (2×1) VOLKMANN mod. VTS 07 , Bauart 5.95 ,
with Nº ​176 spindles , double side ( ​80 x 2 ) , single drive ,
feeding 8 ” inch , diam. 180 mm. ,
delivery on cones 6 ’’ ( traverse 152 mm. ) , conicity 4º20′ ,
pneumatic thread-in volcojet , soft cones device ,
waxing device , inverter to speed set ,
travelling blower Nevenhauser , Y.O.C. 1995 ;

N. 01 Cone to cone winder , Motocono ,
48 position , take up 6″ x 5º57′ ,
waxing device , Blower Electrojet , year 1998